Help for Apple TV

If you experience issues while using Zattoo on your Apple TV, please follow the steps below in the given order. Proceed to the next step if the issue persists.


Table of contents

  1. Important note on device support

  2. Check the Apple TV remote

  3. Restart Apple TV

  4. Reinstall the Zattoo app

  5. Update your Apple TV

  6. Check your network connection

  7. Check video and HDMI settings

  8. Check audio settings

  9. Disable VPN, proxy or DNS filters

  10. Reset Apple TV to factory settings

  11. Contacting support


1. Important note on device support

Zattoo supports Apple TV HD and newer models. Older versions are no longer supported. Issues on unsupported systems cannot be resolved.


2. Check the Apple TV remote

Make sure your Apple TV remote is sufficiently charged.

  • Fully charge the remote.

  • Check whether inputs are delayed or not recognised properly.

  • If necessary, pair the remote with your Apple TV again.

Detailed instructions are available on Apple’s support website here.


3. Restart Apple TV

Restarting the device often resolves temporary issues.

  • Go to Settings → System → Restart.

  • Wait until Apple TV has fully restarted.

  • Open the Zattoo app again.


4. Reinstall the Zattoo app

  • Highlight the Zattoo app on the Home screen.

  • Press and hold the touch surface on the remote.

  • Press the Play/Pause button.

  • Select Delete.

  • Restart Apple TV.

  • Download the Zattoo app again from the App Store.

Further information on managing apps is available on Apple’s User Guide here.


5. Update your Apple TV

  • Open Settings → System → Software Updates.

  • Select Update Software.

  • Install any available updates and restart the device afterwards.

Additional details about tvOS updates can be found on Apple’s User Guide here.


6. Check your network connection

Playback issues may be related to your internet connection.

  • Disconnect and reconnect the network.

  • Restart your router.

  • If possible, test a different network (for example, a mobile hotspot).

  • Check whether other devices on the same network can stream without issues.

Please note:

  • Public or hotel Wi-Fi networks may restrict or block streaming.

  • For maximum stability, a wired Ethernet (LAN) connection is recommended.

Further tips can be found in our Improve streaming quality article.


7. Check video and HDMI settings

In some configurations, video settings may affect playback.

  • Open Settings → Video and Audio.

  • Check the resolution and refresh rate.

  • Test a fixed setting such as 1080p.

  • Try a different HDMI cable or HDMI port on your TV.


8. Check audio settings

In case of sound issues, please check the audio settings.

  • Open Settings → Video and Audio → Audio Format.

  • Set Audio Format to Automatic, Stereo or Dolby 5.1.


9. Disable VPN, proxy or DNS filters

Zattoo may be blocked if the connection uses services that mask or redirect the IP address.

  • Check whether a VPN, proxy or DNS filter is active in your network.

  • Disable these services temporarily.

  • Restart both the router and Apple TV.


10. Reset Apple TV to factory settings

If none of the previous steps resolve the issue, you can reset Apple TV. The device will need to be set up again afterwards.

  • Open Settings → System → Reset.

  • Select Reset and follow the on-screen instructions.


11. Contacting support

If the issue persists, please contact our support team via the contact form and provide the following information:

  • Apple TV generation

  • Installed tvOS version

  • Installed Zattoo app version

  • Your Zattoo email address

  • A brief description of the steps taken before the issue occurred

This information helps us analyse the issue more efficiently.


Was this article helpful?

0 out of 0 found this helpful

Still have questions? Write to us Submit a request